(2,00 mm) .0787" tw series choice of one through six rows specify stacker height in (0,13 mm) .005" increments (2,00 mm) .0787 pitch tw?20?03?t?q?400?085 tw?08?09?f?t?250?100 tw?16?06?l?d?500?100 www.samtec.com mates with: clt, sqt, sqw, esqt, tle, smm, mms, tcsd ?s = single row ?d = double row ?t = triple row ?q = four row ?5 = five row ?6 = six row ??xxx? = stacker height in inches (0,13 mm) .005" increments example: ?250 = (6,35 mm) .250" tail spec plating option stacker height tw row option no. pins per row lead style 02 thru 50 specify lead style from chart below. ??xxx? = tail length in inches (0,13 mm) .005" increments example: -150 = (3,81 mm) .150" ??xxx? = polarized position (specify position to be removed) for complete speci cations see www .samtec.com?tw-th insulator material: black liquid crystal polymer terminal material: phosphor bronze plating: sn or au over 50? (1,27 ?) ni current rating: 3a per contact @ 80? ambient operating temp range: -55? to +105? with tin; -55? to +125? with gold rohs compliant: ye s lead?free solderable: ye s also available right angle see tmm series. shrouded double row see zltmm series. 2 mm shunt see 2sn series. also available paste in hole (pih) processing. contact samtec asp group. f-213-1 surface mount see previous page. low pro? le see tmm series. ?s, ?d*, ?q ?t, ?5, ?6 ?s, ?d*, ?q ?t, ?5, ?6 * ? with stacker height greater than (4,06mm) .160" will not have standoffs. (2,00) .0787 (0,51) .020 sq oal (1,27) .050 min post tail (0,00) .000 min stacker height see chart 04 300 01 295 (2,00) .0787 typ no. of rows x (2,00) .0787 tm specifications note: other gold plating options available. contact samtec. through-hole board stackers ?f = gold ? ash on post, matte tin on tail ?l = 10" (0,25 m) gold on post, matte tin on tail ?t = matte tin * style ?8 & ?2 = s & d only lead style oal ?01 (8,20) .323 ?02 (9,60) .377 ?03 (13,60) .535 ?04 (14,10) .555 ?05 (15,10) .594 ?06 (17,10) .673 ?07 (19,10) .751 ?08 (21,10) .830 ?09 (11,60) .456 ?10 (15,60) .614 ?11 (10,08) .397 ?12 (28,19) 1.110 * * row option stacker height ?s, ?d*, & ?q (3,05) .120 min ?t, ?5, ?6 (4,06) .160 min note: this series is non-standard, non-returnable. note: for added mechanical stability, samtec recommends mechanical board spacers be used in applications with gold or selective gold plated connectors. contact ipg@samtec.com for more information.
|
